MicroWheel Camera Slider

$75$425
MicroWheel Camera Slider
Clear
SKU: N/A Category:
  • Description
  • Additional Information

Product Description

MicroWheel Camera Slider

Video

Included components

Select an option above to see the components included with this item. 

Additional Photos

slider for professional cameras - production  under sling under slung camera slider  camera slider overhead abovecamera slider system in the studio

DIY

solid camera slider configuration

From: Keith Williams

HDSLR camera slider on pipe

camera slider for red epic scarlet camera

From: Basilico Studio (Spain)

MicroWheel Stage 1 Carriage

RigWheels Portable Camera Slider System Portable Camera Slider for Large Camera Sony f3 curved camera slider setup

Portable camera slider on remote location production

Matteo Sacher (Italy)

rugged portable camera slider

From: Sheldon Norton

DIY portable camera dolly

portable camera slider configuration on lighting truss

From: Daniel Wittenaar

Low ange camera slider on the ground

From: Brent Cohen (FL)

Portable Slanted Camera Slider

MicroWheel Stage 2 Carriage

The MicroWheel Stage 2 combines 6 MicroWheels, 1 RigPlate and 1 RigAxel to make a captive rail camera slider. The captive carriage configuration makes your camera much more secure by locking it onto the rails. This setup also allows you to position the carriage/rails at any angle; just the trick for vertical or slanted moves. This kit offers a similar captive rail option to the MicroWheel Stage 3 carriage at a lower price but is not as suitable for handling vertical and angled movement.

RigWheels camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider kit allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera dolly wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.

In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 1 more RigAxel and 4 inline wheels to configure our RigSkate.

RigWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in our products to give customers the ability to modify and come up with different configurations.

This camera slider travels extremely well. With the RigWheels removed, the flat 5/16″ thick RigPlates can fit in many common places like a laptop pocket. 4 RigWheels packed into their included travel bag are about the size of a portable hard drive.

MicroWheels Stage 3 Carriage

MicroWheel Stage 3 Camera Slider Carriage

The MicroWheel Stage 3 Carriage combines 8 MicroWheels and 2 RigPlates to make a captive rail camera slider. The dual carriage configuration makes your camera slider much more secure by locking it onto the rails. This setup also allows you to position the carriage/rails at any angle; just the trick for vertical or slanted moves.

RigWheels camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider carriage allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera dolly wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.

In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 2 RigAxels with inline wheels to configure our RigSkate.

RigWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in our products to give customers the ability to modify and come up with different configurations.

This camera slider travels extremely well. With the RigWheels removed, the flat 5/16″ thick RigPlates can fit in many common places like a laptop pocket. 4 RigWheels packed into their included travel bag are about the size of a portable hard drive.

Aluminum and steel pipe/tube are recommended for suspended camera slider applications like this.

camera slider for red

Photo courtesy: Rick Marrone

Visit our Videos and Photo Gallery sections to see more about how you can use these tools.

RigWheels on Vimeo

USA and foreign

Additional Information

Options

$250.00 – Stage 1 Carriage, $325.00 – Stage 2 Carriage, $425.00 – Stage 3 Carriage, $199.00 – 13″ End Brackets, $75.00 – 75mm Ball Adapter, $80.00 – 100mm Ball Adapter